Merchants, managers and businessmen believe that choosing a conveyor such as an overhead conveyor system is a natural process. In fact, the choice is not as complicated as some people think. Purchasing employees and engineers are always faced with challenges and obstacles to moving materials. Picking up the conveyor can significantly affect the output, but it is usually chosen incorrectly. There are many reasons for misuse. Two of them are:
- Use a limited number of unique pieces of equipment in the conveyor.
- The budget is maintained.
It is important to consider these factors, but it cannot be the basis for choosing a conveyor. Only 6 central components are the main elements of the automatic conveyor selection:
These are the evaluation indicators that should be kept in mind when selecting a conveyor belt. Among the six, the material is the main one. Consideration of material movement requirements will always result in conveyor options.
What to ask before buying a conveyor belt?
Some characteristics should be completely removed before selecting the final substitute from the food conveyor. Knowing their inheritance will help you pick the one that really fits your business. Also, keep in mind that some properties are interdependent. Therefore, it is most appropriate to consider the entire picture and not just a part of it. Start with a blank tablet and answer the following questions:
- What is the material?
First find out the type of material you need to move. Sometimes an element may have many names, such as trade, esoteric, general or chemical. The food conveyor manufacturer is relevant because it provides insight into the choice of the main ingredients it makes. Then look at the form of media you will be working with. The state of matter can be:
- Solid free flow
- Partial free flow
Once you understand the status, consider its bulk density. This density is defined as the weight of material that is reduced per volume as it flows freely. Do not use the specific gravity of the substance as it only reflects the natural form of the substance that you will not handle.
- What is the size and composition of the material?
It is necessary to understand the composition of matter. Know if it is fiber, pellet, granule, flake, granule or powder. Once the structure and composition of the material is evident, search for their particle size. If symmetric entities are used, the range will be defined based on the screen size they can pass through. If an asymmetric solid is used, the geometry will determine the size.
- Does the material flow?
The inherent tilt angle that occurs when a solid "material is metered from a single point without vibration or any effort to deposit an accumulated mound" is called fluidity. Any material that poses a challenge in this area is best sent to the conveyor supplier for review. They can test and then provide a conveyor that fits it.
- Is the material abrasive?
Any abrasive material will scratch and wear the surface in contact with it, determining the type of conveyor that must be used. In general, factory employees are the highest predictor of material wear because there are no standard measurements. Through experience, people can make educated guesses about how matter affects the conveyor belt.
There are two other methods to determine the abrasive properties of a material:
- The hardness of a substance defined by the Vickers or Mohs scale can tell you how rough it is.
- The outline of the particle is another. The material that is the perfect sphere will have no hard edges and will not scratch the surface. However, materials with edges can wear out anything they touch.
- Does the material contain moisture?
The moisture content of the material affects its fluidity. It implies the cohesiveness of matter, so how easy it is to manage it. The moisture content is usually calculated as part of the total weight. The temperature of the substance should also be considered at this time.
Answering each question will give you the most powerful conveyor type. It will lead to a solution that fully meets your material handling needs. In addition, it will guarantee that the products you purchase are worth investing. This is why it is strongly recommended to consider all factors.Easy Accounting For Investment Clubs,Click here!