A-A+

Plumbing Tips You Can Do By Yourself

Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

If you discover that a water pipe has frozen, find the tap closest to the pipe so when the thaw happens, the water has an exit point. Letting the water drain out will relieve pressure in the frozen pipe, which will reduce the chances of it bursting and damaging your home.

Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.

Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.

One of the things that you can do to safeguard your home from any serious plumbing issues is to install a flood alarm. This is a device that will sound when it comes in contact with water, alerting you if there are any issues in a particular area in the house.

One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.

If you have an automatic sprinkler system, you want to consider getting a spring-loaded timer which can be attached directly to your hose. This prevents your lawn from getting too much water in case you forget to turn your system off. Getting too much water could kill your grass and plants.

To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.

When you are working on any kind of plumbing project, you always need a backup person. This is because, when working with water, you never know when an emergency can happen and that second pair of hands can come in very useful! This can even be an unskilled person who can follow directions.

Kitchen and bathroom plumbing is often located on exterior walls and freezes more easily than interior wall plumbing. Keep your furnace at a safe temperature throughout the winter and open cabinet doors in bathroom vanities and beneath kitchen sinks to expose the pipes to warmer room air to prevent freezing.

If you have a plumbing nightmare and your house gets flooded, avoid using heat and heat lamps to dry the property out. Let it dry naturally if you can because the additional heat can cause problems. When building materials dry too fast, they can warp and crack causing more damage than just the water.

Make sure that when you are doing any home improvements to your plumbing that they are done up to the building codes in your area. The building codes are there to protect people from being scalded by hot water, trap harmful sewer gas from entering the home, and ensure plumbing is done properly before finishes are applied.

Avoid putting celery, corn husks, or other stringy foods into your disposal. Even though they seem easily disposable, filling the disposal with enough fibrous material can not only clog the disposal but also eventually lead to the mechanism losing it’s ability to grind up your sink waste because of snags and tangles.

Be sure to blow out your sprinklers during the fall months. If you forget to do it, or have it done, you are going to suffer broken lines and have to go through the expense and the work involved in replacing those lines. If you have an air compressor, it can be done on your own and it will not cost a thing.

If one of your pipes is leaking, you can fix it easily. Drain the water from the pipe by shutting off your main valve and open the closest faucets to drain the remaining water. Clean up the pipe from corrosion with sand paper and apply soldering flux. Heat the pipe with a torch and apply new solder. Repeat until the leak stops.

If you do attempt to do plumbing repairs yourself, do not forget to wear proper safety gear. Many pipes and plumbing areas are under great pressure and if there is a pipe that bursts, it can cause serious injury. Wear the proper eye, hand, and ear protection when doing any plumbing repairs.

So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it’s time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home’s plumbing system.

Family Bunker Plans,Click here! Family Self Defense (view mobile),Click here!

2 comment  view:2   blogger:0 view

  1. plumbing tips 9605

    Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.

  2. plumbing tips 5379

    Coat your sinks with expanding foam to deaden sounds. If you have to sinks side by side, sounds will resonate strongly between them and create vibrations. This is not good for the pipes. The expanding foam will reduce the vibrations and protect your pipes. You might find it easier to apply foam before you install the sink.

leave me a message

Copyright@WaiWaitech inc. © Technology All rights reserved.  

User login ⁄ Register

Share: