Professional plumbing is often a very expensive service, and usually the work that is done is something that any homeowner could solve fairly easily with the proper knowledge and tools. If you’d like to start learning to solve your own plumbing problems, read on to see what you can do.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.
Every so often, inspect the floor around your toilet and see if it has gone soft. Sit reversed on the toilet (facing the tank) with your feet on the floor. Rock your weight onto each foot in turn and see if you can feel any weakness or “give” in the floor. As with many problems, early detection can save you a lot of money.
If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly repairs.
Don’t bother running water when you use your garbage disposal. Most plumbers advise that you run water when using your garbage disposal, although many disagree. Some things can stick to the disposal, and cause it to become damaged beyond repair.
If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.
If you have an odor coming from one or more fixtures in your house, it is likely this has to do with the water in water traps. Each fixture has a water trap that is sealed off to prevent odors. If the water evaporates, the odors can surface. Therefore, try adding water to the traps.
To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.
In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home.
To prevent hair from clogging your drains, install strainers in each tub and shower to capture the hairs before they can go down the drain. When combined with soap build-up, hair can bring your drains to a complete standstill, so it’s important to prevent the hairs from reaching the pipes in the first place.
A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.
Check the plumbing in your home. If your home has the flexible gray polybutylene water pipes, you need to have a plumber come out and assess their condition. These types of pipe are prone to failure and can lead to very costly repairs if they have a failure within your home.
Never flush menstrual products, such as pads or tampons, even if the box says it’s okay. These products can cause major clogs in your plumbing that cannot be removed with a simple plunger. Ensure that all women in your household understand the importance of placing these items in an appropriate receptacle.
The best thing you can do if you smell a foul odor coming from your toilet is to call a plumber. There is a good chance that you may have a sewer backup. Not only can this cause pipe damage, but inhaling the smells from sewer backups is harmful to your help.
Some items, such as bananas, carrots, pumpkin and chicken skins are terrible for blades and they can be caught in the drain and clog it. Get rid of these items prior to using your disposal; you can simply toss them in the trash.
If you are starting a plumbing project due to a leak be sure to tighten all the nuts first. Loose areas are the number one cause for leaks. If after tightening all nuts in the area you find that the leak continues, it is then time to search for possible holes.
If you have a plumbing nightmare and your house gets flooded, avoid using heat and heat lamps to dry the property out. Let it dry naturally if you can because the additional heat can cause problems. When building materials dry too fast, they can warp and crack causing more damage than just the water.
To prevent exposed pipes under your home from freezing during the winter, use foam pipe insulation or electric heat tape to cover your pipes according to the manufacturer’s directions. A burst pipe can cause damage and high water bills, so preventing freezing and bursting is essential during the coldest months of the year.
As you can see, plumbing isn’t as difficult as you may have believed. Many plumbing problems can be solved easily with things on hand, or with a few inexpensive parts. Next time you have a problem with your plumbing, try using the tips in this article to solve it yourself!Family Bunker Plans,Click here! Family Self Defense (view mobile),Click here!